CN
EN
DE
ES
FR
IT
PT
JA
KO
AR
Our main products include: PP spunbond non woven production line, meltblown non-woven production line, spunmelt composite nonwoven production line (such as SMS,SMMS, SSMMS, SMMMS …etc), Polyester (PET) non woven fabric production line, Nylon (PA) non woven production line, etc. We successfully launch the PLA/RPET non woven fabric production line in 2021.
(1)The embryonic period, is in the early 1940s -- 1950s, most of the textile enterprises use ready-made prevention equipment, appropriate transformation, the use of natural fiber manufacturing nonwoven materials.
(2)The commercial production period, is the end of the 1950s - the end of the 1960s, at this time the main use of dry technology and wet technology, the use of a large number of chemical fibers to manufacture nonwoven materials.
(3)The important development period, the early 1970s -- the end of the 1980s, at this time the polymerization, extrusion method of complete set of production lines was born.
The rapid development of various special nonwoven fiber chemical fibers, such as low melting point fiber, hot bonding fiber, two-component fiber, ultrafine fiber, has promoted the progress of nonwoven material industry.
This is a new industry based on the cooperation of petrochemical, plastic chemical, fine chemical, paper industry and textile industry, known as the sunrise industry in the textile industry ", its products have been widely used in various sectors of the national economy.
On the basis of the continuous rapid growth of nonwovens output, nonwovens technology has made a lot of substantial progress at the same time, attracting worldwide attention, nonwovens production area is also rapidly expanding.(4)The global development period, from the early 1990s to now, nonwovens have achieved rapid development.
Through the technical innovation of equipment, product structure optimization, intelligent equipment, market brand, etc., the nonwoven technology is more advanced, mature, more sophisticated equipment, nonwoven materials and products performance significantly improved, production capacity and product series continue to expand, new products, new technologies, new applications in an endless stream.
During this period, the technology of spinning mesh and melt-blown nonwovens has been rapidly popularized and applied in production, and machinery manufacturers have launched complete sets of spinning mesh and melt-blown nonwovens production lines to the market.
In these two exhibition,we are happy to provide you a turn key solution of nonwoven fabric making project. All the key figures involved in the dynamic field of nonwovens All the geographical regions together in one site
The square meter quality, strength, elongation, hydrostatic pressure, air permeability and width in the technical requirements are factory inspection items The products shall be inspected by the inspection department of the manufacturer and attached with the product certificate before leaving the factory.
Polylactide, polylactic acid, generally shortened to PLA. PLA biodegradable materials refer to a class of natural microorganisms such as bacteria, molds (fungi) and algae caused by the action of degradation materials.
