CN
EN
DE
ES
FR
IT
PT
JA
KO
AR
Compared with conventional single-layer spunbond production lines, the YP-SMS line is designed for applications that require a stronger balance of fabric strength, breathability, liquid resistance, and filtration performance. It is suitable for manufacturers producing materials for medical protective clothing, surgical gowns, face masks, diapers, sanitary products, and other hygiene or protective nonwoven applications.
Available in 1,600 mm, 2,400 mm, and 3,200 mm effective widths, the YP-SMS SMS spunmelt production line operates at speeds of up to 350 m/min. Depending on the selected width and operating conditions, the line delivers approximately 10–22 tons of output per day and produces fabrics from 9–80 g/m².
S-M-S Composite Structure — Combines spunbond strength layers with a meltblown middle layer to support filtration, barrier performance, and fabric strength.
Up to 350 m/min Production Speed — Supports efficient, continuous SMS spunmelt nonwoven fabric production.
High-Performance Fabric Properties — Suitable for applications requiring a balance of strength, breathability, filtration efficiency, and liquid barrier performance.
Flexible Grammage Range — Produces SMS nonwoven fabrics from 9–80 g/m² for hygiene, medical, and industrial applications.
Flexible Width Options — Available in 1,600 mm, 2,400 mm, and 3,200 mm effective widths, with customized configurations available upon request.
One-Stop Service — End-to-end support from project consultation to installation, training, and after-sales service.
24-Hour Technical Support — Rapid response from Yanpeng’s technical team to support reliable operation and minimize downtime.
Daily output varies by line width, fabric grammage, production speed, raw-material formulation, operating conditions, and production efficiency. Where multiple output ranges are shown, they correspond to the listed 1,600 mm, 2,400 mm, and 3,200 mm product widths, respectively.
Medical Protection: Medical protective clothing, surgical gowns, disposable drapes, medical packaging, and other protective nonwoven materials
Hygiene Products: Diaper top sheets and back sheets, sanitary-napkin materials, feminine-care products, and disposable hygiene products
Face Masks: Inner, middle, and outer layers for disposable face masks, subject to the applicable product design and material specifications
Industrial Protection: Protective garments, filtration substrates, and composite materials requiring barrier or filtration performance
Packaging: Protective packaging materials and specialty packaging applications requiring strength, softness, or barrier properties
The SMS Spunmelt Production Line has passed certification from professional institutions, holding the following certificates:
ISO 9001:2015 Quality Management System Certification — Registration No. 05325E31506R0M, issued to Zhejiang Yanpeng Nonwoven Machinery Co., Ltd., covering the scope of non-woven fabric machine manufacture.
EC-Attestation Certificate of MD & LVD (CE) — Certificate No. CMZJ22120542978, confirming conformity with the Machinery Directive 2006/42/EC and Low Voltage Directive 2014/35/EU, covering the S, SS, SSS, SMS, SSMS, SMMS, and SSMMS model series.
Yes. The line is equipped with a dedicated co-extruder that enables 100% utilization of edge-trim waste and recycled PP granules during production, minimizing material waste and supporting more circular material use.
For medical, hygiene, filtration, or other safety-sensitive end uses, the selection and proportion of recycled material should be determined according to the finished-product specification and applicable market requirements.
An SS line uses two spunbond beams to form a double-layer spunbond fabric, mainly providing strength, uniformity, and production capacity for general-purpose nonwoven applications.
An SMS spunmelt production line uses a spunbond–meltblown–spunbond composite structure. The meltblown middle layer introduces fine fibers that support improved filtration and barrier performance, making SMS fabric more suitable for hygiene, medical, protective, and filtration-related applications.
Core control and spinning components incorporate Siemens automation control systems and Enka spinneret technology.
Yes. Yanpeng provides 24-hour technical response for overseas buyers, with on-site installation and commissioning typically completed within approximately 30 days, depending on site conditions and project requirements. Operator training is provided through on-site instruction and video guidance, and the equipment comes with a 12-month warranty covering the complete production line.
The 3,200 mm YP-SMS model delivers approximately 20–22 tons per day under the reference condition of producing 40 g/m² fabric. Actual output varies according to fabric grammage, raw-material formulation, operating conditions, and production efficiency.
With over 17 years of experience and 700+ production lines delivered worldwide, Yanpeng combines SMS composite-process capability, flexible line configurations, established component technologies, and full-lifecycle technical support to provide a dependable solution for hygiene, medical, and protective nonwoven manufacturing.
● S-M-S Composite Capability: The line combines spunbond outer layers with a meltblown middle layer to support fabric strength, filtration, and barrier performance.
● Flexible Production Configuration: Available in 1,600 mm, 2,400 mm, and 3,200 mm widths, with a 9–80 g/m² grammage range for varied SMS fabric applications.
● Established Core Components: The production line incorporates Siemens automation control systems and Enka spinneret technology.
● Full Lifecycle Support: Technical support includes installation, commissioning, on-site and video-based training, and after-sales maintenance.
● Global Service Reach: Backed by 24-hour technical response and installation/commissioning experience across 300+ customers worldwide.
Zhejiang Yanpeng Nonwoven Machinery Co., Ltd. (originally established in 2008 as Wenzhou Yanpeng Nonwoven Technology Co., Ltd.) is a professional manufacturer with over 17 years of experience in the research, development, and production of nonwoven fabric production lines, based in Wenzhou, Zhejiang Province. Backed by a team of 130+ employees and holding 21 patents for inventions and utility models, Yanpeng operates a 20,000 m² production facility and maintains an average customer relationship of 6+ years across its 500+ customer base, with a 99.5% customer satisfaction rate. The company provides customized single-beam, double-beam, and triple-beam spunbond lines, as well as SMS, SMMS, SSMS, and SSMMS spunmelt composite production lines. The company holds ISO 9001 certification and CE conformity documentation for applicable nonwoven production line models, along with import/export rights to serve customers worldwide.
24/7 technical response support with fast remote troubleshooting and global service coordination to minimize production downtime.
Installation and commissioning experience in 300+ customers worldwide across Asia, the Middle East, Africa, North America, and South America, covering diverse production environments and standards.
Flexibility & Customization
The S-M-S composite configuration combines spunbond and meltblown processing to produce SMS nonwoven fabrics from 9–80 g/m². By adjusting process parameters and material formulation, the line can support different requirements for strength, softness, breathability, filtration, and barrier performance.
Equipment width and footprint can be tailored to project requirements and existing factory layouts. The YP-SMS line is available in 1,600 mm, 2,400 mm, and 3,200 mm effective widths to support different production capacities and market plans.
High Automation & Intelligence
A Siemens PLC-based control system unifies feeding, extrusion, spunbond spinning, meltblown processing, drawing, web forming, calendering, winding, and slitting on a single platform, enabling coordinated operation throughout the SMS spunmelt production line.
The dual-mode feeding system (volumetric/gravimetric) and metering pumps form a closed-loop feedback system that monitors output and automatically adjusts raw-material dosing and melt extrusion rates. This reduces manual intervention while helping stabilize melt flow and basis-weight consistency.
Energy Efficiency & Eco-Friendliness
The SMS Spunmelt Production Line operates primarily through thermal processing and pneumatic airflow rather than wet-process chemicals, reducing liquid discharge associated with wet processing and supporting environmentally responsible nonwoven manufacturing.
The dedicated co-extruder enables 100% utilization of edge-trim waste and recycled PP granules during production, minimizing material waste while supporting long-term circular-economy production goals for global buyers.
Demonstrated Expertise & Strong Supply Chain
Critical components—including dual filtration units, coat-hanger-type spinning dies, meltblown die assemblies, and perforated stainless-steel quenching systems—are selected and integrated to support stable melt distribution, fiber formation, and web uniformity across the production width.
Core control and spinning components incorporate Siemens automation control systems and Enka spinneret technology, while Yanpeng coordinates the selection and integration of key mechanical, electrical, and process components to support compatibility across the complete SMS nonwoven production line.
The SMS Spunmelt Production Line follows a continuous, automated path from raw material to finished fabric roll:
Raw Material Feeding → Extrusion → Filtration → Metering → First Spunbond Spinning → Meltblown Extrusion and Fiber Formation → Second Spunbond Spinning → Cooling and Drawing → Composite Web Forming → Calendering → Winding & Slitting
The process begins with the dual-mode automatic feeding and mixing unit, which doses PP raw material and recycled content through the co-extruder into the spunbond and meltblown extrusion systems. The polymer melt passes through filtration and metering systems before entering the respective spinning dies.
The first spunbond system forms the initial strength layer. The meltblown system then creates a fine-fiber middle layer, followed by the second spunbond system, which forms the outer strength layer. The layers are cooled, drawn, and combined into a composite web before thermal bonding through the calender. The finished SMS fabric is then wound and slit to customer-specified roll widths.
The SMS Spunmelt Production Line is designed to process PP raw materials with a melt flow index (MFI) of 25–40. Color masterbatch, calcium carbonate (CaCO₃) filler, and other additives can be incorporated according to finished-product requirements, provided that the selected formulation is compatible with the intended hygiene, medical, filtration, or industrial application.
The spunbond layers are engineered to provide fabric strength and structural stability, while the meltblown layer forms a fine-fiber web that supports filtration and barrier performance. Final fabric properties—including basis weight, softness, strength, breathability, and barrier performance—can be adjusted according to the target application.
Yanpeng provides technical support throughout the equipment lifecycle, including installation, commissioning, on-site and video-based operator training, and after-sales maintenance. Our technical team responds to service and technical inquiries within 24 hours to help ensure smooth production line operation.
Installation and commissioning typically take approximately 30 days, depending on site conditions and project requirements. The equipment is supplied with a one-year warranty covering the complete production line.
Composite Fabric Capability: The S-M-S structure combines spunbond strength layers with a meltblown functional layer for applications requiring filtration and barrier performance.
Flexible Product Development: A 9–80 g/m² grammage range supports the development of SMS fabrics for hygiene, medical, protective, industrial, and specialty packaging applications.
Improved Material Utilization: Co-extruder recycling capability enables the reuse of edge-trim waste and recycled PP granules during production.
Stable Process Control: Closed-loop feedback helps maintain consistent raw-material dosing, melt flow, and basis-weight control.
Established Core Components: The production line incorporates Siemens automation control systems and Enka spinneret technology.
| Model No. | Product Width | Equipment Size (L × W × H) | Machine Speed | Grammage Range | Daily Output* |
| YP-SMS | 1,600 mm | 32 × 20 × 11 m | Up to 350 m/min | 9–80 g/m² | 10–11 tons/day |
| YP-SMS | 2,400 mm | 32 × 21 × 11 m | Up to 350 m/min | 9–80 g/m² | 15–16 tons/day |
| YP-SMS | 3,200 mm | 32 × 22 × 11 m | Up to 350 m/min | 9–80 g/m² | 20–22 tons/day |
Daily output is based on production of 40 g/m² fabric. Actual output may vary depending on fabric grammage, raw-material formulation, operating conditions, and production efficiency.
|
Raw Material Feeding & Mixing Unit |
2set, dual-mode automatic feeding (volumetric/gravimetric) |
|
Extruder |
2set, heated by cast aluminum blocks or far-infrared systems |
|
Co-Extruder |
2set, for recycling ensuring 100% material utilization |
|
Filter |
2set, dual filtration units |
|
Metering Pump |
2set, determines production capacity and fabric grammage |
|
Spinning Die |
2set, Melt distribution method: coat-hanger type |
|
Spinning Components |
2set, 4 modular sections |
|
Quenching and Drawing System |
2set, air distribution through perforated stainless-steel plates |
|
Stretching System |
2set, negative-pressure stretching |
|
Diffuser |
2set, Diffusion mode: fiber separation |
|
Web Former |
1set, process speed: 10~450m/min |
|
Calender |
1set, operating speed: 10~450m/min |
|
Winder |
1set, designed speed: 10~450m/min |
|
Slitter |
1set, designed speed: 10~1000m/min |
Yanpeng’s sales and service network supports customers in Asia, the Middle East, Africa, Europe, North America, and South America. Through regional sales offices and service partners, we provide project consultation, installation support, operator training, and after-sales maintenance for nonwoven fabric production lines.
This network supports the deployment and long-term operation of spunmelt composite production lines (SMS, SMMS, SSMS, SSMMS) for hygiene, medical, and industrial applications.
Product Classification
