CN
EN
DE
ES
FR
IT
PT
JA
KO
AR
The SSMS Spunmelt Production Line is a high-performance composite nonwoven manufacturing system designed for hygiene, medical, protective, and specialty packaging applications. Using an S-S-M-S four-layer structure—spunbond, spunbond, meltblown, and spunbond—the line combines three spunbond layers for strength and fabric uniformity with a meltblown layer for filtration and barrier performance.
Compared with conventional SMS lines, the SSMS configuration provides an additional spunbond layer to support enhanced fabric strength, thickness uniformity, and structural stability. It is suitable for manufacturers producing materials for medical protective clothing, surgical gowns, disposable hygiene products, face-mask materials, protective packaging, and other applications requiring a balanced combination of strength, breathability, filtration, and liquid-barrier performance.
Available in 1,600 mm, 2,400 mm, and 3,200 mm effective widths, the YP-SSMS line operates at speeds of up to 400 m/min. Depending on the selected width and operating conditions, the SSMS spunmelt production line produces fabrics from 10–80 g/m², with daily output ranging from approximately 12 to 28 tons.
S-S-M-S Four-Layer Composite Structure — Combines three spunbond layers for strength and web uniformity with one meltblown layer for filtration and barrier performance.
Up to 400 m/min Production Speed — Supports high-output, continuous SSMS composite nonwoven production.
Enhanced Strength and Uniformity — The additional spunbond layer supports improved structural stability, fabric strength, and thickness consistency.
Balanced Filtration and Barrier Performance — The meltblown layer supports applications requiring a balance of breathability, filtration, and liquid-barrier properties.
Flexible Grammage Range — Produces SSMS nonwoven fabrics from 10–80 g/m² for hygiene, medical, protective, and specialty packaging applications.
Flexible Width Options — Available in 1,600 mm, 2,400 mm, and 3,200 mm effective widths.
One-Stop Service — End-to-end support from project consultation to installation, training, and after-sales service.
24-Hour Technical Support — Rapid response from Yanpeng’s technical team to support reliable operation and minimize downtime.
Daily output varies by line width, fabric grammage, production speed, raw-material formulation, operating conditions, and production efficiency. Where multiple output ranges are shown, they correspond to the listed 1,600 mm, 2,400 mm, and 3,200 mm product widths, respectively.
Medical Protection: Medical protective clothing, surgical gowns, isolation gowns, disposable drapes, and medical packaging materials
Hygiene Products: Diaper materials, sanitary-napkin materials, feminine-care products, and other disposable hygiene nonwovens
Face-Mask Materials: Composite layers for disposable mask production, subject to applicable material and finished-product requirements
Specialty Packaging: Protective packaging materials requiring enhanced strength, uniformity, or barrier properties
Industrial Protection: Protective garments, composite substrates, and specialty nonwoven products requiring balanced strength and filtration performance
The SSMS Spunmelt Production Line has passed certification from professional institutions, holding the following certificates:
ISO 9001:2015 Quality Management System Certification — Registration No. 05325E31506R0M, issued to Zhejiang Yanpeng Nonwoven Machinery Co., Ltd., covering the scope of non-woven fabric machine manufacture.
EC-Attestation Certificate of MD & LVD (CE) — Certificate No. CMZJ22120542978, confirming conformity with the Machinery Directive 2006/42/EC and Low Voltage Directive 2014/35/EU, covering the S, SS, SSS, SMS, SSMS, SMMS, and SSMMS model series.
The SSMS line can be equipped with a dedicated co-extruder for the reuse of edge-trim waste and recycled PP granules. The appropriate recycled-material proportion should be determined according to the required end use, product specification, and applicable quality standards.
For medical, hygiene, mask, filtration, or other safety-sensitive applications, raw-material selection and recycled-content use should comply with the relevant product and market requirements.
An SMS line uses an S-M-S structure with one meltblown layer between two spunbond layers. An SMMS line uses an S-M-M-S structure with two meltblown layers, supporting enhanced filtration and barrier performance.
The SSMS line uses an S-S-M-S structure, adding an extra spunbond layer to the SMS configuration. This design emphasizes fabric strength, thickness uniformity, and structural stability while retaining the filtration and barrier contribution of the meltblown layer.
Core control and spinning components incorporate Siemens automation control systems and Enka spinneret technology.
Yes. Yanpeng provides 24-hour technical response for overseas buyers, with on-site installation and commissioning typically completed within approximately 30 days, depending on site conditions and project requirements. Operator training is provided through on-site instruction and video guidance, and the equipment comes with a 12-month warranty covering the complete production line.
The 3,200 mm YP-SSMS model produces approximately 27–28 tons per day. Daily output is based on the reference condition of producing 40 g/m² fabric and may vary with fabric grammage, raw-material formulation, operating conditions, and production efficiency.
● S-S-M-S Composite Capability: Three spunbond layers and one meltblown layer provide a balanced structure for strength, uniformity, filtration, and barrier performance.
● High-Output Configuration: The line operates at up to 400 m/min and delivers approximately 12–28 tons per day, depending on the selected width and operating conditions.
● Flexible Fabric Production: Produces SSMS fabrics from 10–80 g/m² for medical, hygiene, protective, and specialty packaging applications.
● Established Core Components: The production line incorporates Siemens automation control systems and Enka spinneret technology.
● Full Lifecycle Support: Technical support includes installation, commissioning, on-site and video-based training, and after-sales maintenance.
● Global Service Reach: Backed by 24-hour technical response and installation/commissioning experience across 300+ customers worldwide.
Zhejiang Yanpeng Nonwoven Machinery Co., Ltd. (originally established in 2008 as Wenzhou Yanpeng Nonwoven Technology Co., Ltd.) is a professional manufacturer with over 17 years of experience in the research, development, and production of nonwoven fabric production lines, based in Wenzhou, Zhejiang Province. Backed by a team of 130+ employees and holding 21 patents for inventions and utility models, Yanpeng operates a 20,000 m² production facility and maintains an average customer relationship of 6+ years across its 500+ customer base, with a 99.5% customer satisfaction rate. The company provides customized single-beam, double-beam, and triple-beam spunbond lines, as well as SMS, SMMS, SSMS, and SSMMS spunmelt composite production lines. The company holds ISO 9001 certification and CE conformity documentation for applicable nonwoven production line models, along with import/export rights to serve customers worldwide.
24/7 technical response support with fast remote troubleshooting and global service coordination to minimize production downtime.
Installation and commissioning experience in 300+ customers worldwide across Asia, the Middle East, Africa, North America, and South America, covering diverse production environments and standards.
Flexibility & Customization
1. The S-S-M-S composite configuration combines three spunbond layers with one meltblown layer, enabling the production of nonwoven fabrics from 10–80 g/m². Process parameters and material formulations can be adjusted according to the required strength, softness, breathability, filtration, and barrier performance.
2. Equipment width and footprint can be tailored to project requirements and existing factory layouts. The YP-SSMS line is available in 1,600 mm, 2,400 mm, and 3,200 mm effective widths to support different production capacities and market plans.
High Automation & Intelligence
1. A Siemens PLC-based control system unifies feeding, extrusion, spunbond spinning, meltblown processing, drawing, composite web forming, calendering, winding, and slitting on a single platform, enabling coordinated operation throughout the SSMS spunmelt production line.
2. The dual-mode feeding system (volumetric/gravimetric) and metering pumps form a closed-loop feedback system that monitors output and automatically adjusts raw-material dosing and melt extrusion rates. This reduces manual intervention while helping stabilize melt flow and basis-weight consistency.
Energy Efficiency & Eco-Friendliness
1. The SSMS Spunmelt Production Line operates primarily through thermal processing and pneumatic airflow rather than wet-process chemicals, reducing liquid discharge associated with wet processing and supporting environmentally responsible nonwoven manufacturing.
2. The line can be equipped with a dedicated co-extruder for the reuse of edge-trim waste and recycled PP granules. For medical, hygiene, filtration, or other safety-sensitive applications, recycled-content use should be selected according to finished-product requirements and applicable quality standards.
Demonstrated Expertise & Strong Supply Chain
1. Critical components—including three filtration units, three coat-hanger-type spinning or meltblown die assemblies, and perforated stainless-steel air-distribution systems—are selected and integrated to support stable melt distribution, fiber formation, and composite-web uniformity across the production width.
2. Core control and spinning components incorporate Siemens automation control systems and Enka spinneret technology, while Yanpeng coordinates the selection and integration of key mechanical, electrical, and process components to support compatibility across the complete SSMS spunmelt production line.
The SSMS Spunmelt Production Line follows a continuous, automated path from raw material to finished fabric roll:
Raw Material Feeding → Extrusion → Filtration → Metering → First Spunbond Spinning → Second Spunbond Spinning → Meltblown Fiber Formation → Final Spunbond Spinning → Cooling and Drawing → Composite Web Forming → Calendering → Winding & Slitting
The process begins with the automatic feeding and mixing system, which doses PP raw material into the extrusion systems. The polymer melt passes through filtration and metering systems before entering the respective spunbond and meltblown die assemblies.
The first and second spunbond systems form structural layers, followed by the meltblown system that creates a fine-fiber functional layer. The final spunbond system forms the outer structural layer. The four layers are combined into a composite web, thermally bonded by the calender, wound, and slit into customer-specified roll widths.
The SSMS Spunmelt Production Line is designed to process PP raw materials selected for the required finished-product performance. Color masterbatch and other compatible additives can be incorporated according to the product specification and intended application.
The spunbond layers provide fabric strength, structural stability, and uniformity, while the meltblown layer forms a fine-fiber web that supports filtration and barrier performance. Final fabric properties—including basis weight, softness, strength, breathability, filtration performance, and liquid-barrier performance—can be adjusted according to application requirements.
Yanpeng provides technical support throughout the equipment lifecycle, including installation, commissioning, on-site and video-based operator training, and after-sales maintenance. Our technical team responds to service and technical inquiries within 24 hours to help ensure smooth production line operation.
Installation and commissioning typically take approximately 30 days, depending on site conditions and project requirements. The equipment is supplied with a one-year warranty covering the complete production line.
Enhanced Fabric Strength: The S-S-M-S structure adds an additional spunbond layer to support fabric strength, thickness uniformity, and structural stability.
Balanced Functional Performance: The meltblown layer supports filtration and liquid-barrier performance for hygiene, medical, protective, and specialty applications.
High-Output Production: The line supports speeds of up to 400 m/min and daily output of approximately 12–28 tons, depending on working width and operating conditions.
Flexible Product Development: The 10–80 g/m² grammage range supports different product designs and performance requirements.
Established Core Components: The production line incorporates Siemens automation control systems and Enka spinneret technology.
| Model No. | Machine Speed | Grammage Range | Product Width | Equipment Size (L × W × H) | Daily Output |
| YP-SSMS | Up to 400 m/min | 10–80 g/m² | 1,600 mm | 46 × 20 × 11 m | 12–13 tons/day |
| YP-SSMS | Up to 400 m/min | 10–80 g/m² | 2,400 mm | 46 × 21 × 11 m | 19–20 tons/day |
| YP-SSMS | Up to 400 m/min | 10–80 g/m² | 3,200 mm | 46 × 22 × 11 m | 27–28 tons/day |
Daily output is based on production of 40 g/m² fabric. Actual output may vary depending on fabric grammage, raw-material formulation, operating conditions, and production efficiency.
| Component | Specification |
| Raw Material Feeding & Mixing Unit | 3set, dual-mode automatic feeding (volumetric/gravimetric) |
| Extruder | 3set, heated by cast aluminum blocks or far-infrared systems |
| Co-Extruder | 3set, for recycling ensuring 100% material utilization |
| Filter | 3set, dual filtration units |
| Metering Pump | 3set, determines production capacity and fabric grammage |
| Spinning Die | 3set, Melt distribution method: coat-hanger type |
| Spinning Components | 3set, 4 modular sections |
| Monomer Suction |
|
| Quenching and Drawing System | 3set, air distribution through perforated stainless-steel plates |
| Stretching System | 3set, negative-pressure stretching |
| Diffuser | 3set, Diffusion mode: fiber separation |
| Web Former | 1set, process speed: 10~600m/min |
| Calender | 1set, operating speed: 10~600m/min |
| Winder | 1set, designed speed: 10~600m/min |
| Slitter | 1set, designed speed: 10~1200m/min |
Yanpeng’s sales and service network supports customers in Asia, the Middle East, Africa, Europe, North America, and South America. Through regional sales offices and service partners, we provide project consultation, installation support, operator training, and after-sales maintenance for nonwoven fabric production lines.
This network supports the deployment and long-term operation of spunmelt composite production lines (SMS, SMMS, SSMS, SSMMS) for hygiene, medical, and industrial applications.
See the SSMS Spunmelt Production Line in operation.
SSMS Spunmelt Production Line
Product Classification
